• Welcome to XIMI TECHNOLOGY LIMITED
DT20

DT20

DT20
Product name : DT20
Item : DT20
Details :

What's elevator access control?

• Only Authorised people use elevator.

• Secured and safe.
• Faster and easy floor selection with a card.
• Flexibility to move from floor to floor.
• Controls access / use of elevator by time of day and day of week(e.g. No restriction duringdaytime and controlled usage by night.)
• All / selected floors can be access controlled.
• Selected floor can be Deactivated during certain hours. (e.g. during public functions, parties,etc.)
• Simple electrical interface to any elevator.
• Power saving as un-necessary landing calls are avoided.
• Landing A/C optional
• Suitable for Duplex Elevator Controller
• Recording of elevator usage by cardholder with date and timestamp 
• Every Transaction stored with date & time stamp 
• Access by Card/ Card + PIN/ finger

Elevator Controller System Introduction:

1 Intelligent Access Control Device in Elevator Interior
The device is installed in the cab panel. Each elevator needs a reader. Then it has dual functions: single charge and access control. There are a variety of products which can satisfy various needs of different customers.

2 Card Device
Card device: users insert the card in the card-reading zone which is in the elevator operation panel. Thus, you needn't consider the distance while reading the card and can activate the elevator exactly the way you want. The card zone is small and takes up less room. You needn't consider the used room of the elevator operation panel, and you can easily realize the advantages of the card system.

3 Password/ Fingerprint Device
The Fingerprint elevator management system is specially used for the people who want high security requirements. The leaders use fingerprint, the workers use card, and passwords as a backup. Thus, the elevator intelligence has higher improvements.

4 Remote Device
A remote device is another upgrade of elevator IC card system. You needn't swipe card or get close to the elevator operation panel. Just press your remote control, you can use the elevator. Thus, you avoid some troubles when starting elevator by getting close to elevator operation panel.

5 Intelligent Access Control Device out of elevator
The device is installed in the calling board outside of the elevator. Passengers can call the elevator after swiping card by the device. The device stops non-authorized from using elevator, which makes the building safe and energy saying.

6 Intelligent Access Control Devices in and out of Elevator
a, Swipe Card by the Device outside/Inside of Elevator
b, Call Elevator
c, Enter the Cab
You can select the floor you registered in the management center after swiping card by device in elevator
You needn't swipe card in elevator and select the floor you registered in the management center.

7 VIP Device
VIP device only refers to users with VIP card. When users with VIP card uses elevator, they can be sent to the desired floor directly without stopping. Other users can not make the elevator stop at a floor call when users with VIP card uses elevator. VIP device guarantees the safety and privacy of users with VIP cards and save more time for users with VIP cards.

8 Visitor Device
Visitor device can work with intercom to solve the trouble of guests that are visiting.

Introduction:

Normal management of the Access Control are "One for One", that means one card reader control one door. Valid card can open the door, invalid card can not open. Bur we can found that in many fields, a "One for More Controllers" are needed.

Features:

Example 1: Lift Access Control Management
We usually have ten or more floors in one lift, but you just need one card reader. The system can distinguish the user's privilege, then take them to the right floor.
If the user has multi-floor privilege, when swiping the card, he can choose the floor he want to go this time, and he can not push other floor buttons.
If the users are the security and administrator, they can go to any floor they want according to the privilege settings. 

Example 2: Cabinet Access Control
It can combine with the Adroitor software to manage this. 
When you swiping card, the appoint cabinet will open.
The administrator can use PC to open all doors at one time to do some check and manage work.
The cleaner can open all the door to do cleaning work after office-time.
Some customers do not like card reader, they also can use Biometric instrument like: finger-print readers, face recognition and so on if they have wiegand format. The Manage Function can start using: Card+Password 

Specifications:

Model
DT20 one-to-more controller
Apply to
WGaccess management software
Card Capacity
20,000
Transaction Capacity
100,000
Communications
TCP/IP
The largest networking sets
unlimited
Input
1 Wiegand 26 bit (34 bit, etc.) format card reader or other biometric device
Packing
Neutral
Circuit board size
164 x 106 mm
Fire signal input
1
Power supply
DC 12 v  
Models
DT20K extension board
Applicable
Elevator, Cabinet
Output
20 ways
Packing
Neutral
Circuit board size
219 * 115 mm 
Power
DC 12 v  
[Next : L04]→
Related Products :
L01 single door access control panel
L01
L01 single door access control panel
L02 two-door access control panel
L02
L02 two-door access control panel
L04 four-door access control panel
L04
L04 four-door access control panel